- Add 生产订单号 as the first column in output (13 columns total)
- Read production order number from column A of input worksheet
- Only display production order number on first row for each product model
- Set material code column to text format to preserve leading zeros
- Update OutputColumns enum indices in M04_Config.bas
- Update ReadInputModels to return 2 columns (order number + model)
- Update ProcessSingleModel, GenerateMaterialRow, GenerateErrorRow signatures
- Update WriteExtractionResults to write 13 columns with text formatting
Co-Authored-By: Claude Sonnet 4.5 <noreply@anthropic.com>
- Delete default sheets (Sheet1, Sheet2, etc.) created by Workbooks.Add
- Save output workbook as BOM库.xlsx in the same directory as source file
- Auto-close workbook after saving
- Update completion message to show save path
- Use ThisWorkbook.Path to get source file directory
Co-Authored-By: Claude Sonnet 4.5 <noreply@anthropic.com>
- Add COL_IDX_CODE66 constant for column I in M04_Config.bas
- Extend data reading range to include column I in M02_DataIO.ReadSourceData
- Use .Text property for column I to preserve leading zeros
- Update baseInfo array to use column I instead of column C in M01_Main.bas
- Set output code column to text format to prevent numeric conversion
Co-Authored-By: Claude Sonnet 4.5 <noreply@anthropic.com>
Implement edge material validation logic that behaves differently based on azxs value:
- When azxs is A0, Z0, or B0: Edge material is NOT required (0 matches = OK, 1+ matches = ERROR)
- When azxs is AH, AT, BH, BT, BZ, ZH, ZT, or ZZ: Standard validation applies (exactly 1 match required)
- Supports dual-value azxs format (e.g., "A0,径向" extracts "A0" for validation)
Changes:
- M09_BOMExtractor.bas:
- Update MatchAllMaterialTypesWithValidation to pass params to validation
- Update ValidateAllMatchResults signature to accept params parameter
- Add "边" to special sheets array
- Implement Phase 3.5: Edge material validation with azxs-based rules
- Update function header comments
- docs/BOM匹配错误判断机制详解.md:
- Add section 6.5: Edge material special handling
- Update error type table with EdgeMaterialError
- Update function index and version history
Co-Authored-By: Claude Sonnet 4.5 <noreply@anthropic.com>
Add a preprocessing step to the BOM Extraction System to enhance parameter
extraction with mapping values from "对照表" worksheet. For azxs (安装形式)
and lcfw (量程范围), the system now stores both the raw parsed value AND the
mapped value from the lookup table, enabling flexible dual-value matching.
Changes:
- Create M06A_Mapper.bas: New module for value mapping
- Load azxs/lcfw mappings from "对照表" worksheet
- Return dual-value format "raw,mapped" (e.g., "A0,径向")
- Support graceful degradation if "对照表" not found
- Define constants locally to avoid VBA cross-module reference issues
- Modify M06_ModelParser.bas:
- Extract raw parameter values first
- Apply mapping via M06A_Mapper if initialized
- Store dual values for azxs and lcfw parameters
- Modify M07_BOMMatcher.bas:
- Update EvaluateCellCondition() to support dual-value matching
- Split by comma and check if ANY value matches
- Backward compatible with single-value parameters
- Modify M09_BOMExtractor.bas:
- Initialize M06A_Mapper during RunBOMExtraction()
- Add WorksheetExists() helper function
- Log warning if "对照表" worksheet not found
- Define MAPPING_SHEET_NAME constant locally
- Modify M04_Config.bas:
- Add mapping table configuration constants
- MAPPING_SHEET_NAME, MAPPING_COL_LCFW_KEY, etc.
- Update CLAUDE.md:
- Document new M06A_Mapper module
- Update data flow diagram with mapping step
- Document dual-value matching behavior
- Update system architecture diagram
- Update docs/RunBOMExtraction_运行机制详解.md:
- Add M06A_Mapper to all diagrams and documentation
- Add detailed value mapping section
- Update sequence diagrams with mapping flow
- Update parameter examples with dual-value format
- Bump documentation version to 3.0
Example:
Input: Product model "YTHN-100.A0.531.G123.M04.Y3"
Parse: azxs="A0", lcfw="M04"
Map: azxs="A0,径向", lcfw="M04,高压"
Match: BOM库 with azxs="径向" OR "A0" → MATCH
Co-Authored-By: Claude Sonnet 4.5 <noreply@anthropic.com>
Major refactoring of BOM matching error handling mechanism to separate
matching phase from validation phase, enabling cross-worksheet validation
and non-blocking warnings.
Changes:
- clsErrorLogger: Add warning support
- Add RecordWarning() method for non-blocking issues
- Add HasWarnings and HasIssues properties
- Update PrintReport() to show errors and warnings with color coding
- Add "Type" column to distinguish errors from warnings
- M09_BOMExtractor: Implement two-phase validation
- Replace MatchAllMaterialTypes() with MatchAllMaterialTypesWithValidation()
- Add ValidateAllMatchResults() for unified cross-worksheet validation
- Phase 1 (Collection): Gather all worksheet matches without recording errors
- Phase 2 (Validation): Validate all results with special rules for components
- Phase 3 (Generation): Create final material collection based on validation
- Add ToArray() helper for Collection to Array conversion
- Enhanced component/joint/element validation:
- Support warnings for non-blocking conflicts (e.g., component + joint both matched)
- Better cross-validation between "部件", "接头", "弹性元件" worksheets
- Distinguish between errors (blocking) and warnings (non-blocking)
- Documentation updates:
- Update BOM匹配错误判断机制详解.md to v2.0
- Document two-phase verification approach
- Add warning scenarios and handling
Co-Authored-By: Claude Sonnet 4.5 <noreply@anthropic.com>
- Add BOM library column name constants (名称, 编码, 数量, etc.)
- Add GetBOMConditionFields() and IsConditionField() utility functions
- Refactor ExtractMaterialInfo to use column names instead of hardcoded positions
- Refactor ExtractSingleSubComponent to use column names for 接头/弹性元件
- Refactor ExtractComponentInfo to use column names
- Improve MatchAllMaterialTypes to iterate all worksheets dynamically
- Add debug logging for troubleshooting
This fix resolves issues where worksheets with non-standard column counts
(like 表壳, 罩壳) could not extract material information properly.
Co-Authored-By: Claude Sonnet 4.5 <noreply@anthropic.com>
- Add BOM auto-extraction system requirements specification
- Minor property name fixes in M05_PreProcessor (.Pattern -> .pattern)
- Fix .Row property references to .row for consistency
Co-Authored-By: Claude Sonnet 4.5 <noreply@anthropic.com>
Add complete BOM auto-extraction system with the following modules:
- M06_ModelParser: Parse product model strings to extract parameters
(azxs, bkxs, gclj, jycz, lcfw, fjgn)
- Extracts header part from full model (ignores dial/attachment parts)
- Splits process connection and material code (G123 -> G12, 3)
- Supports multiple additional features with comma/dot separators
- M07_BOMMatcher: Match materials in BOM library
- Exact match, wildcard (empty cell), negative match (!=)
- Special fjgn contains matching logic
- Array-based performance optimization for bulk operations
- M08_ComponentProcessor: Handle component material special logic
- Component inventory check (interface reserved)
- Sub-component extraction (joint + elastic element)
- Combination validation rules (1 component OR 1 joint + 1 element)
- M09_BOMExtractor: Main extraction orchestrator
- Reads input models from worksheet
- Processes each model and matches all material types
- Outputs to "BOM提取结果" worksheet
- Error reporting and non-blocking design
- M06B_TestRunner: Comprehensive unit tests
- 8 test cases for model parsing
- 5 test cases for BOM matching
- 5 test cases for component processing
- M04_Config: Add BOM extraction constants
- BOM library filename and configuration
- Input/output column definitions
- Output column enumeration
- M01_Main: Add RunBOMExtraction entry point
Co-Authored-By: Claude Sonnet 4.5 <noreply@anthropic.com>
Rename VBA/ directory to VBA_BOMConverter/ for better clarity.
This change reflects the module's purpose as the BOM converter component.
Co-Authored-By: Claude Sonnet 4.5 <noreply@anthropic.com>
